Shade Awnings
Filter
-
- Fast, secure, and robust roof rack mounting solution for awnings.
- Part of RacksBrax HD range
- Suits pull-out awnings or accessories with spine track spacings between 40-52mm and M8 fasteners. With 3 mounting points or brackets
- Fast 10 second fitting or removal of accessories with the HD Hitch
$240.00 -
- LPack of 2 awning brackets to attach Eeezi-Awn 1000 or 2000 awnings to the side of Front Runner Slimline II platform roof racks.
- Suits Eezi-Awn 1000/2000 awnings, but may fit other brands, refer to the attachment point diagram to check hole centre measurements
- Utilizes the t-slot system on the top and bottom of the Slimline II platform for a super secure attachment
- Made from steel with advanced powder coating for the ultimate in durability
$105.00 -
- Pack of 2 awning brackets to attach Eeezi-Awn Bat 270 or Manta 270 awnings to the side of Front Runner Slimline II platform roof racks.
- Designed for Eezi-Awn Bat and Manta awnings, but may fit other brands, refer to the attachment point diagram to check hole measurements for compatibility
- Utilizes the t-slot system on the top and bottom of the Slimline II platform for super secure attachment
- Made from steel with advanced powder coating for the ultimate in durability
$165.00 -
- Innovative awning mounting that allows you to position your awning at any angle between the side and rear of the vehicle, follow the sun or just position it for practicality
- Designed to mount Front Runner Easy Out 1.4m, 2m, and 2.5m sizes directly to the arm
- Can be used with other brand pull out awnings but some drilling may be required depending on spine track spacing
- Features 2 locking pins to secure the arm to either the side or rear positions in windy weather
- Suitable for awnings with up to a 12kg weight
- Note minimum platform size is 1358mm x 1255mm for use with this awning
$973.00 -
- Easily remove or mount your awning to your Front Runner platform in seconds with this 2 pack of quick-release awning mounting brackets
- Unobtrusive low-profile brackets can be left on the platform when the awning is removed
- Durable, and strong mounting system has been off-road tested to ensure “rattle free” operation, with ample 20kg weight capacity
- Suitable for all Front Runner awnings and some other pull out and 180 degree awnings from Eezi-Awn, Oz tent and others, not compatible with 270 degree awnings
- Easy-to-use tool free latch system makes removing or fitting your awning a breeze once brackets are installed, these can also be secured with locks sold separately
- Includes wall mounting brackets for storing your awning in the garage when not in use, plus all required hardware
$224.00 $199.00 -
- This durable single awning mounting brackets will fit most awnings to most types and brands of roof rack systems
- Includes two tough L brackets with dimensions of 210mm x 80mm
- Does not include nuts or bolts
$34.95 -
- This durable awning mounting kit will fit most awnings to most types and brands of roof rack systems
- Includes two tough L brackets with dimensions of 210mm x 80mm
- Pack has four 40mm M8 nuts/bolts plus four 20mm M6 nuts/bolts to suit different systems
- Even includes two pegs and two guy ropes as a nice bonus
$69.95 -
- Long foot bracket for mounting Eclipse 270 or 180 awnings to your roof rack system
- Provides a more secure fitment and may be necessary for some platform type racks
- Multi slotted design allows for fitment to a wide variety of roof rack brands and types
- Weight 1.5kg with Dimensions 330mm x 70mm x 155mm
$59.95 $55.00 -
- Fast, secure, and robust roof rack mounting solution for pull out awnings
- Part of RacksBrax HD range
- Suits pull-out awnings or accessories with spine track spacings between 40-52mm and M8 fasteners. With 3 mounting points or brackets
- Fast 10 second fitting or removal of accessories with the HD Hitch
$255.00 $229.00 -
- Simple, secure, and easy to use storage solution for awnings
- Fits all RacksBrax HD hitches
- Includes 2 brackets with locks included for added security
- Quick release system allows easy change of roof rack accessories in under 10 seconds
$125.00 -
- L shape brackets for attachment of RacksBrax HD hitches to roof rack systems
- Built from powder coated 5mm thick stainless steel for strength and durability
- 20kg load capacity per bracket
- 2 bracket package
$155.00 $139.00 -
- Pack of 3 awning brackets to attach a variety of awnings to the side of Front Runner Slimline II roof rack.
- Suits Rhino Foxwing 270, Darche Eclipse 180 and Eclipse 270 awnings, not suitable for easy out or freestanding awnings
- Utilizes the t-slot system on the top and bottom of the Slimline II platform for a super secure attachment
- Made from 3CR12 stainless steel with advanced powder coating for the ultimate in durability
$165.00 -
- L shape brackets for attachment of RacksBrax HD hitches to roof rack systems
- Built from powder coated 5mm thick stainless steel for strength and durability
- 20kg load capacity per bracket
- 3 bracket package
$195.00 $173.55 -
- Height and tilt adjustable brackets for fitting RacksBrax HD hitches to your roof rack
- 50mm range of vertical height adjustment, in 12.5mm increments
- 15 degrees of tilt adjustment possible from vertical plane
- 2 bracket package
$285.00 $256.00 -
- Fast, secure, and robust roof rack mounting solution for wing style awnings
- Part of RacksBrax XD range
- Suits 180, 270 and 360 degree wing style awnings with spine track spacings between 100mm and 120mmm. With 2 mounting points or brackets.
- 2 hitch package
$265.00 $238.00 -
- Fast, secure, and robust roof rack mounting solution for wing style awnings
- Part of RacksBrax XD range
- Suits 180, 270 and 360 degree wing style awnings with spine track spacings between 100mm and 120mmm. With 2 mounting points or brackets.
- 3 hitch package
$305.00 $274.00 -
- Height adjustable brackets for fitting RacksBrax XD hitches to your roof rack
- 50mm range of vertical height adjustment, in 12.5mm increments
- Available in long and short versions and in double or triple pack
- 2 bracket package
$275.00 $247.00 -
- Pack of 2 awning mounting brackets using Rhino’s innovative Stow-It system to make fitting, removal, or swapping out to another roof rack accessory amazingly fast and easy
- Attaches to your awning, then simply slides into the Stow-It base bracket on your roof rack
- Stow-It base bracket sold separately
- Fits Rhino-Rack Batwing and Sunseeker awnings
- Powder coated to resist corrosion for years to come
$70.00 $56.00 -
- Designed to allow fitting of unusual awnings with spine spacing outside 100mm to 120mm range to Racksbrax XD hitches.
- Compatible with entire Racksbrax XD hitch range
- 2 pack
$105.00 -
- Designed to allow fitting of unusual awnings with spine spacing outside 100mm to 120mm range to Racksbrax XD hitches.
- Compatible with entire Racksbrax XD hitch range
- 3 pack
$135.00 $127.00 -
- 2 pack of awning mounts designed especially to fit Tracklander fully enclosed roof rack
- Awning attachment holes spaced to allow fitment of most pull out awning models and brands
- Clamps easily to the top and bottom rail on the side or rear of your Tracklander rack
- Hefty load capacity of 15kg per bracket
- Zinc plated and powder coated to endure many years of use and abuse
$112.00 -
- 2 pack of awning mounts designed especially to fit Tracklander Flat Top or Tent Topper racks
- Awning attachment holes spaced to allow fitment of most pull out awning models and brands
- Zinc plated and powder coated to endure many years of use and abuse
$127.00 -
- Durable, strong, and versatile set of 3 awning brackets to fit Front Runner platforms
- Slotted design allows various awning mounting heights
- Built using 3mm stainless steel with powder coating for excellent durability
- 40kg load rating
$295.00 -
- A 3 pack of height adjustable awning mounts for fitting a wide range of 270 degree awnings to various roof rack systems
- With slotted mounting holes to suit 270 degree awnings from various brands including Darche, Oztent, NOMAD, Foxwing, Supapeg, 23Zero, Bush Company, XTM, Kings, Rhino-Rack Batwing, Bushwakka, and Dune
- Universal design provides even weight distribution and suits a variety crossbar roof racks with T-slots from Thule, Yakima, Pro Rack, Rhino-Rack and Rola
- Also suits Yakima LockNLoad, Rhino-Rack Pioneer, Rola Titan and Kings platform style roof racks
- Not suitable for Rhino-Rack 5 series 1586mm wide platforms
- Built using durable 3mm powder coated stainless steel for corrosion resistance, with a total weight capacity of 40kg, plenty of allowance for most awnings
$325.00 -
- This 2 pack of durable and strong 4mm powder coated stainless steel L-type brackets is designed for mounting your pull out awning to a Rhino-Rack platform
- Suits awnings with spine track spacing ranging from 33mm to 50mm
- Use 2 brackets for awnings up to 2m width and 3 brackets for 2.5m awnings
- Not suitable for 180 and 270 degree awnings
$75.00 -
- This 2 pack awning brackets is designed for mounting your pull-out awning to the outermost rail of any ARB Base platform roof rack
- Suits awnings with spine track spacing ranging from 33mm to 50mm
- Use 2 brackets for awnings up to 2m width and 3 brackets for 2.5m awnings, with a 5kg load rating per bracket
- Crafted from 4mm stainless steel which is then powder coated for maximum strength and resistance to the elements while blending into your platform
$110.00 -
- A 3 pack of height adjustable awning mounts for fitting a wide range of 270 degree awnings to ARB Base roof rack systems
- With slotted mounting holes to suit 270 degree awnings from various brands including Darche, Oztent, NOMAD, Foxwing, Supapeg, 23Zero, Bush Company, XTM, Kings, Rhino-Rack Batwing, Bushwakka, and Dune
- Attaches to ARB Base platform’s unique dovetail mounting on both the outer rail and internal slats for the best weight distribution and the most secure attachment possible
- Built using durable 3mm powder coated stainless steel with a weight capacity of 40kg, plenty of allowance for most awnings
$348.00 -
- Adapter plates for roof top tents with spine track spacing of 52mm to 100mm.
- Part of RacksBrax HD range
- Fits RacksBrax HD hitches
- Pack of 2 adapter plates
$115.00 $112.00 -
- Adapter plates for roof top tents with spine track spacing of 52mm to 100mm
- Part of RacksBrax HD range
- Fits RacksBrax HD hitches
- Pack of 3 adapter plates
$145.00 $129.05 -
- Glass-reinforced nylon part which attaches to your awning to allow it to be used with Racksbrax XD hitch bodies.
- Compatible with entire Racksbrax XD hitch range
- 3 pack
$65.00 -
- Pair of awning mounts designed for quick release mounting of awnings up to 20kg in weight
- Must be used in conjunction with Tracklander TLRABB accessory base bracket, sold separately
- Awning attachment holes spaced to allow fitment of most pull out awning models and brands
- Zinc plated and powder coated to endure many years of use and abuse
$148.00 -
- Reduces height of awning bracket by 100mm from your roof rack when awning is removed
- Folds 90 degrees from vertical to horizontal position for lower profile
- Compatible with Racksbrax XD hitch range
- 3 bracket long version package
$510.00 $459.00 -
- Allows Darche hardshell rooftop tent owners to attach any Darche or Kozi awning directly to their rooftop tent
- Combination of mounting holes and slots gives flexibility with mounting heights
- May also suit awnings from other brands
- Kit includes two mounting brackets and fasteners
- Set of 2 brackets included
$99.95 -
- Easily remove or mount your awning to your Front Runner platform in seconds with this 2 pack of quick-release awning mounting brackets
- Unobtrusive low profile brackets can be left on the platform when the awning is removed
- Durable, and strong mounting system has been off-road tested to ensure “rattle free” operation, with ample 20kg weight capacity
- Suitable for all Front Runner awnings and some other pull-out awnings from Eezi-Awn, Oz tent and others, not compatible with 180 degree or 270 degree awnings
- Easy-to-use tool free latch system makes removing or fitting your awning a breeze once brackets are installed, these can also be secured with locks sold separately
- Includes wall mounting brackets for storing your awning in the garage when not in use, plus all required hardware
$180.00 -
- These ultra durable and strong awning brackets are designed for Rhino's freestanding awning range but are equally useful for almost any brand or type of awning
- Offers flexibility in mounting height
- Easily handles heavier awnings over 20kg, depending on weight and type 2 or 3 brackets may be required
$129.00 -
- A 2 pack of basic L style awning brackets to fit your Sunseeker awning to Rhino-Rack Vortex and HD crossbars as well as Pioneer platform and Tradie roof rack systems.
- Easy to install, simply slide the brackets into the channel on your roof rack and attach your awning
- Can be installed using Rhino’s Zwifloc channel nuts, sold separately, for an even more versatile and simple mounting option
- Built of 5mm mild steel with zinc plating and powder coating to resist corrosion while being an affordable option
- Fits awnings from other brands with the same spine track spacing as Sunseeker awnings
$60.00 $48.00
