Switches & Plugs
Filter
-
The range of Old Style Toyota Push Switches maintain the factory look and feel of your vehicle with a wide variety of prints from LED Light Bars & Air Compressors to Diff Locks and much more.$30.00 -
Eliminate the need to splice and or solder your vehicles factory wiring with our piggy back adaptors.$24.00 -
Eliminate the need to splice and or solder your vehicles factory wiring with the Stedi piggy back adaptors.$24.00 -
Single throw ON / OFF switch designed to operate 12 volt driving lights. Switch surface size is 49mm x 25mm and uses a standard din size mounting hole of 36mm x 22mm, which is the standard size in most vehicles. Please ensure you check these measurements to ensure correct fitment.$19.00 -
Compatible with all STEDI Square Type Push Switches.$13.00 -
2 to 1 Deutsch DT/DT-P Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT 2 to 1 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our 2 Output wiring harness$25.00 -
Just plug in a USB C Muter Flush to experience the convenient device-powering capabilities.$22.00 -
The new Ford switch fascia to suit the Next-Gen Ranger, Raptor and Everest (2022+) effortlessly solves the lack of accessory switch blanks in the Ford models. The STEDI Switch Panel provides the OEM-caliber fit & finish you'd expect from STEDI.$139.00 -
Specifically designed to suit the Ford Next-Gen Ranger, Raptor & Everest models, to provide easy solution for wiring up your Driving Lights with no need for splicing, trapping or soldering.$50.00 -
Specifically designed to suit the Ford Next-Gen Ranger, Raptor & Everest models, to provide easy solution for wiring up your Driving Lights with no need for splicing, trapping or soldering.$25.00 -
The STEDI™ Isuzu MU-X Piggy Back Adapter has been carefully designed to be a quick-fit solution for all of your wiring needs.$50.00 -
Deutsch connectors have a built a reputation as market leaders and with solid foundation. 100% environmentally sealed, and very reliable pin contacts help eliminate wiring gremlins by fortifying your harness with Deutsch. Thermal plastic connector eliminate heat at the plugs resistant point.$12.00 -
Deutsch connectors have a built a reputation as market leaders and with solid foundation. 100% environmentally sealed, and very reliable pin contacts help eliminate wiring gremlins by fortifying your harness with Deutsch. Thermal plastic connector eliminate heat at the plugs resistant point.$12.00 -
New for 2018 The new square 22 x 22mm Push latching type switch designed for the new incoming Toyota models like the Toyota Land Cruiser Prado (GDJ150R, second face-lift.$30.00 -
Compatible with all STEDI Nissan Short Type Push Switches.$13.00 -
New for 2018 our new square 22 x 22mm Push latching type switch designed for the new incoming Toyota models like the Toyota Land Cruiser Prado (GDJ150R, second face-lift.$30.00 -
The new Landcruiser Prado has magnificent factory fitted Bi-LED headlamps. Problem is that wiring auxiliary driving lights that are high-beam switched is a nightmare. Up until this point, the only option for professional installers and DIY enthusiasts has been to purchase the Genuine Toyota Harness which retails for $190.00.$69.00 -
Short Type Push Switch To Suit Toyota$30.00 -
Specifically designed to suit the LDV T60 MAX 2021 - 2023, LED Models ONLY.$36.00 -
150mm wire tail with Deutsch sealed DT connector.$12.00 -
150mm Deutsch DT-P to DT connector.$15.00 -
150mm wire tail with Deutsch sealed DTP connector$12.00 -
2 to 1 DT Connectors$25.00 -
2.0m Extension Cable with Seal DT connector$25.00 -
2.0m Extension Cable with Seal DT or DTP connector$25.00 -
Universal Quick Fit SMART Harness™ - High Beam triggered.$69.00 -
Work Light Wiring Kit / Loom$36.00 -
Quick Fit & High Beam Driving Light Wiring Kit Loom.$45.00 -
Switch Panel with USB and Digital Volt Meter$50.00 -
Ford Ranger & Mazda BT-50 OEM Replacement Push Switches that can replace the blank switches supplied in the cabin from factory for more relevant operational switches that are available in different prints depending on the attached device.$25.00 -
Motorcycle LED Light Switch$30.00 -
Tall Type Push Switches to suit Mitsubishi$25.00 -
Toyota Winch Power Switch OEM Style$25.00 -
Toyota Winch Power Switch OEM Style$25.00 -
$25.00 -
Suited to fit Nissan Navara NP300 (2015+ models in front of cupholder), Navara D40 (2008 - 2014 models), Pathfinder R51 (2005 - 2012 models), Patrol Y61/Y62 (2013+ models) & X-Trail T30/T31 (2000 - 2013 models). Available in 5 variants of print to replace blank factory switches.$25.00
