Spacers & Adapters
Filter
-
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.
$37.00 -
Cruz roof rack fitting kit Fix Point, Rail adaptor, 932-005. Please note that this is only one component of a modular system i.e. it must be fitted to the relevant Cruz roof racks. Select your vehicle from our homepage to ensure that you are ordering the correct racks (style and length) for your car.$39.00 -
The 10mm Quick Mount Base Wedge is designed to create a level bar when fitting an RLT600 Quick Mount leg to a track position that is curved or angled.$18.00 -
Provide extra height to your LockN'Load set up so that you can have leveled crossbar with vehicle cab and canopy.$35.00 -
Provide extra height to your LockN'Load set up so that you can have leveled crossbar with vehicle cab and canopy.$27.50 -
Provide extra height to your LockN'Load set up so that you can have leveled crossbar with vehicle cab and canopy.$15.00 -
The RLKS5 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,$56.00 -
The RLKS4 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,$50.00 -
The RLKS3 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,$40.00 -
The RLKS2 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,$26.00 -
The RLKS1 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar,$15.00 -
Works with LockNLoad bars to give an extra 15 mm height clearance.$27.50 -
The 5mm Quick Mount Base Wedge is designed to create a level bar when fitting an RLT600 Quick Mount leg to a track position that is curved or angled.$16.00 -
The Quick Mount Vortex Spacer (25mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.$30.00 -
The Quick Mount Vortex Spacer (20mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.$22.00 -
The Quick Mount Vortex Spacer (15mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.$19.00 -
The Quick Mount Vortex Spacer (10mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.$17.00 -
The Quick Mount Vortex Spacer (5mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.$18.00 -
The Quick Mount$15.00 -
The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.$34.00 -
The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.$30.00 -
The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.$30.00 -
The Vortex ROC25 Spacer (25mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.$19.00 -
U BOLT FOR GUTTER MOUNT KIT PAIR$43.00 -
TRACKLANDER PACKERS$43.00 -
Backbone 8 Bolt Kit.$8.00 -
Adaptor kit to suit EGR RollTrac$49.00 -
The Vortex ROC25 Spacer (5mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.$12.00 -
The Vortex ROC25 Spacer (10mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.$12.00 -
Rola Titan Tray Spare Parts - Curvature Adaptor Pair (25-0313)$22.57 -
The EB-FK2 is a fitting kit designed to fit the Euro bar to RLKVO legs.$29.00 -
The EB-FK1 is a fitting kit designed to fit the Euro bar to RLKVA legs.$25.00 $12.00 -
Works with LockNLoad bars to give an extra 7.5 mm height clearance.$15.00 -
The Vortex ROC25 Spacer (15mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.$15.00 -
8 pack of height packers compatible with Prorack Heavy Duty bars. Provides 30.5 mm extra height between vehicle roof and bottom of bar.$49.00 $39.00 -
Do you have a canopy that's higher than your cab? These height packers are ideal to level your Prorack HD crossbar across your vehicle or to just add some clearance to your existing crossbars. TP1 - set of 2 packers TP2 - set of 4 packers TP3 - set of 6 packers TP4 - set of 8 packers$39.00
